Fujitsu PRIMERGY PG-R1CK2 User Manual page 59

5
Attach the inner rails to the server.
When attaching the 2 inner rails to the
rack, be aware that the left rail (auto
lock) and right rail (manual lock) are
different.
Make sure to attach each rail to it's
proper side of the server with screws
(M4) in the 4 locations (A) indicated in
the figure.
Note: The slide rail is attached to the
rack cabinet in step 10 (after the rail
brackets). Step 6 to 9 describe how to
attach the rail brackets to the rack cabi-
net.
6
Loosen the 4 screws (M4) on the rail brackets (4 per bracket).
16 Conversion procedure