3G Industrial PRO User's Manual
III
Advanced Configuration
Configuration on Web
3.1
Industrial PRO must be correctly configured before use. This Chapter will show you how to configure via Web.
3.1.1 Preparation
Firstly, connect your devices with 3G INDUSTRIAL by cable or HUB (switch), then set the IP of PC and 3G
INDUSTRIAL in the same subnet, for example: Set PC IP to 192.168.2.50, net mask: 255.255.255.0, gateway (default IP of
3G INDUSTRIAL: 192.168.2.1 ):
Open IE browser, input the IP address of 3G INDUSTRIAL:
Then you'll see the Login Web below, you need to login as Administrator. Input the username and password (default:
adm/123456).
www.digicom.it
http://192.168.2.1
(default IP of 3G INDUSTRIAL).
19