Table of Contents
Advertisement
3G Industrial PRO User's Manual
2.3 Quick Connection to Internet
2.3.1 Insert SIM Card
Open Industrial Router SIM/UIM card case at the button, insert the SIM card and close the case.
2.3.2 Antenna Installation
After install the 3G INDUSTRIAL, connect the interface of enhanced antenna and the interface of skin antenna and
screw closely. Put the amplifier of enhanced antenna to where there receives good signal.
Attention: The position and angle may influence the quality of signal.
2.3.3 Power Supply
Link the power supply in the product package with Industrial PRO, watch where the Industrial PRO Power LED on the
panel is light up. If not, please connect with Digicom for technical supports.
You can configure 3G INDUSTRIAL after the Power LED lights up.
2.3.4 Connect
Link the 3G INDUSTRIAL with PC:
(1) Using the cable to link 3G INDUSTRIAL with PC;
(2) After the connection, you can see one LED of RJ45 Interface turns green and the other flashes.
2.3.5 First Connect Industrial PRO with Your PC
3G INDUSTRIAL Router can auto-distribute IP address for PC. Please set the PC to automatically obtain IP address via
DHCP. (Based on the Windows operation system):
1) Open "Control Panel", double click "Network Connections" icon, and enter "Network Connections" Screen.
2) Double click "Local Area Connection", enter "Local Area Connection Status" screen:
www.digicom.it
9
Advertisement
Table of Contents
