Table of Contents
Advertisement
3G Industrial PRO User's Manual
If the screen shows:
Then the link between the PC and Router is correct connected. Else if it shows:
Then the connection seems not build, and you need to check thoroughly following the former instructions.
2.3.6 Start to configure your Industrial Router (Optional)
After you have finished the former steps, you can configure the Router:
1) Open IE browser, input the default IP address of the Router: http://192.168.2.1, you can see the login web below:
Input "username" (default: adm) and the "password" (default: 123456), and then click "login" to enter the operation screen.
2) Change the IP configuration:
Attention: After configuration, please click "apply" to activate your configuration.
If you want to set your own IP of Industrial Router, please follow the instructions below:
www.digicom.it
12
Advertisement
Table of Contents
