Troubleshooting - Honeywell 51306533 User Manual

8.1 Overview
The FDAP doesnot contain any user-serviceable parts inside the FDAP enclosure, any
failure within a FDAP requires a replacement of the FDAP.
If a fault or a failure is indicated or suspected in a FDAP in the network, there are many
ways to diagnose a problem. You can:

Monitor using alarms

Monitoring using reports

System logs
FDAP failure indications
Failure indication may be signaled through the FDAP status LEDs.
Restarting FDAP
You can restart the FDAP if a failure is suspected.
R200 OneWireless Field Device Access Point User's Guide
October 2010

8. Troubleshooting

Honeywell Confidential & Proprietary
45