Table of Contents
Advertisement
User Name
Password
IKE Authentication Method This group of fields is applicable for IPSec Tunnels and L2TP
IPSec Security Method
Callback Function
88
further specify the corresponding security methods on the right
side.
Uncheck the checkbox-This means the connection type you
select above will apply the authentication methods and security
methods in the general settings.
This field is applicable when you select PPTP or L2TP w/ or
w/out IPSec policy above. This field is also applicable if you
select ISDN.
This field is applicable when you select PPTP or L2TP w/ or
w/out IPSec policy above. This field is also applicable if you
select ISDN.
with IPSec Policy when you specify the IP address of the
remote node. The only exception is Digital Signature (X.509)
can be set when you select IPSec tunnel either w/ or w/o specify
the IP address of the remote node.
Pre-Shared Key - Input 1-63 characters as pre-shared key.
Digital Signature (X.509) - Select one predefined in the X.509
Peer ID Profiles.
This group of fields is a must for IPSec Tunnels and L2TP with
IPSec Policy when you specify the remote node.
Medium -Authentication Header (AH) means data will be
authenticated, but not be encrypted. By default, this option is
active.
High-Encapsulating Security Payload (ESP) means payload
(data) will be encrypted and authenticated. You may select
encryption algorithm from Data Encryption Standard (DES),
Triple DES (3DES), and AES.
Local ID - Specify a local ID to be used for Dial-in setting in
the LAN-to-LAN Profile setup. This item is optional.
The callback function provides a callback service only for the
ISDN dial-in user. The router owner will be charged the
connection fee by the telecom.
Check to enable Callback function-Enables the callback
function.
Specify the callback number-The option is for extra security.
Once enabled, the router will ONLY call back to the specified
Callback Number.
Check to enable callback budget control-By default, the
callback function has a time restriction. Once the callback
budget has been exhausted, the callback mechanism will be
disabled automatically.
Callback Budget (Unit: minutes)- Specify the time budget for
the dial-in user. The budget will be decreased automatically per
callback connection.
Vigor3100 Series User's Guide
Advertisement
Table of Contents
