Contents 1 Important Safety Care for your product Care of the environment Compliance Help and support 2 Your Subwoofer What’s in the box Subwoofer 3 Connect Connect to power Connect to Wi-Fi (wireless operation) Upgrade firmware Factory reset 5 Product specifications 6 Troubleshooting...
1 Important • Never insert objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall Read and understand all instructions before remain readily operable.
Help and support Disposal of your old product and battery Your product is designed and For extensive online support, visit manufactured with high quality www.philips.com/support to: materials and components, which can • download the user manual and the be recycled and reused.
2 Your Subwoofer Subwoofer This section includes an overview of the Congratulations on your purchase, and wireless subwoofer. welcome to Philips! To fully benefit from the support that Philips offers, register your subwoofer at www.philips.com/support. What’s in the box USB service...
For information about the basic connections Android phones, etc.) to the same Wi-Fi of your subwoofer and accessories, see the network, you can then use the Philips Sound quick start guide. app powered by DTS Play-Fi to control the subwoofer to listen to audio files.
Page 7
Without the upgrade, not all switched temporarily to Play-Fi device AP product features can be available. and restart Philips Sound APP to complete • When the first time set up is not successful, the product’s Wi-Fi setup. See the steps...
Page 8
Wi-Fi light indicator will stop pulsing connected to the internet. and turn solid. » TV sound is muted. Launch the Philips Sound App powered Enter the Settings menu on TV. by DTS Play-Fi. » Settings > Sound > DTS Play-Fi Select the Primary Speaker [TAW8506].
(Settings > Fine Tune / Update Firmware) Surround sound Setup The firmware for MCU and DSP can be upgraded to the latest version via Philips Follow the on-screen setup. Sound powered by DTS Play-Fi. Please go to settings menu and select PS Fine Tune / Update Firmware option to check it out.
• When the first time set up is not request service. If you still have a problem, successful, close the Philips Sound app get support at www.philips.com/support. powered by DTS Play-Fi. Restart the app. •...
Page 12
Specifications are subject to change without notice. Please visit www.Philips.com/support for the latest updates and documents. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited.