Factory Default Settings - NETGEAR AX1800 EAX14 User Manual

Factory Default Settings

To reset the extender to factory default settings, you can use the Reset button on the
side panel or you can log in and click the onscreen RESET button. For more information,
see Return the extender to its factory default settings on page 56.
The following table shows the factory default settings.
Table 10. Factory default settings
Feature
Smart Setup
WiFi communication
WiFi network name (SSID)
Security
Transmission speed
Country/region
Operating mode
Data rate in the 2.4 GHz band
Data rate in the 5 GHz band
DHCP
1
Maximum WiFi signal rate (IEEE Standard 802.11). Actual throughput can vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead lower actual
data throughput rate.
Supplemental Information
AX1800 4-Stream WiFi 6 Mesh Extender
Default Settings
Enabled
Enabled
NETGEAR_EXT
Disabled
1
Auto
Varies by region
802.11a/b/g/n/ac/ax
Max 600 Mbps
Disabled by default
(When enabled the max data rate is 1200 Mbps)
Server and client are enabled
70 User Manual