Makita UT2204 Technical Information page 5

High Voltage Countries and Areas
where Noise Suppression is Required by Regulation
W
iring diagram
[2] Motor Housing
Put Earth terminal in place as illustrated in Fig. 12.
Fig. 12
Earth terminal
Motor Housing
[3] Handle portion of motor Housing
Fig. 13
Be careful not to route the lead wires (black)
of Noise suppressor over the ribs.
Rib
Terminal block
Polyolefin tube
Lead Wire (clear)
Noise suppressor
Noise
Switch
Suppressor
Choke Coil
Motor housing viewed from
Earth terminal
Field
Motor Housing
Fix lead wire (clear) of Noise suppressor
with the lead wire holders.
Pilot lamp
P 5 / 7
Fix the following two lead
wires with the lead wire
holder, and be sure that
they are are tight in this
portion;
* Lead Wire (white)
from Support complete
* Connecting lead wire
(orange) from Brush
holder
Lead wire holder