Specifications - Makita BFT022F Instruction Manual

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
3-1. Switch trigger
4-1. Reversing switch lever
5-1. Front lamp
6-1. LED indicator

SPECIFICATIONS

Fastening torque
No load speed (min
Battery cartridge
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
7-1. Adjusting grip
7-2. Ring
8-1. Adjusting ring
8-2. Ring
8-3. Scale
8-4. Adjusting grip
8-5. Hole for adjusting grip
Model
Hard joint
Soft joint
-1
)
Dimensions
Net weight
Rated voltage
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
BFT022F
0.5 - 2 N•m
0.5 - 2 N•m
700
200 x 74 x 250mm (with Battery Cartridge BL1430)
200 x 74 x 235 mm (with Battery Cartridge BL1415)
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Screwdriver
Model No./ Type: BFT022F, BFT044F, BFT084F,
ENG901-1
BFT126F
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
3
8-6. Yellow line
8-7. Compression spring
10-1. Bit
10-2. Sleeve
12-1. Limit mark
13-1. Brush holder cap
13-2. Screwdriver
BFT044F BFT084F
1 - 4 N•m 3 - 8 N•m
1 - 4 N•m 3 - 8 N•m
950 780
1.5 kg (with Battery Cartridge BL1430)
1.4 kg (with Battery Cartridge BL1415)
D.C.14.4V
BL1430 / BL1430A / BL1415
Corporation as
BFT126F
5 - 12 N•m
5 - 12 N•m
410
ENH101-16
the responsible