Makita CL106FD Instruction Manual page 7

1
2
► 1 . Prefilter 2. Capsule
Twist the prefilter in direction of the arrow to unfasten
the securing lip from the cleaner unit and then pull off
the prefilter.
1
► 1 . Prefilter 2. Securing lip
Clean out fine dust from the prefilter. And then, pull off
the filter and lightly tap it to remove dust.
► 1 . Filter 2. Prefilter
2
1
2
Reassembly
Put on the filter fully in position on the cleaner unit.
► 1 . Filter
NOTICE:
Make sure the filter is put on straight
without being peeled back. If the filter is put on
incorrectly as illustrated, dust will get into the motor
housing, and cause a motor failure.
► 1 . Filter
Install the prefilter. At this time, make sure to twist the
prefilter so that the securing lip is firmly locked in the
cleaner unit.
► 1 . Prefilter 2. Securing lip
7 ENGLISH
1
1
1
2