Install The Light Bulbs; Install The Filters - Kenmore 233.5128 Series Use & Care / Installation Manual

This range hood requires two shielded Halogen Bulbs (120 V, 50 W max., MR16 or PAR16 with GU10 base).
WARNING: Do not touch lamps during or soon
after operation. Burns may occur. In order to
prevent the risk of personal injury, only install
shielded halogen lamps. Also, never install a cool
beam, a dichroic lamp, a lamp not suitable for
use in recessed luminaires or identifi ed for use in
enclosed fi xtures.
BULB
LEADS
1. Align the bulb leads with the small indentations located on
the border of the lamp location on hood (see inset above),
then install the bulbs by placing the bulb leads into their
grooves in the socket.
NOTE: The Suction Cup Tool (included with hood) can be used to install and remove light bulbs. Press suction cup tool on
bulb and rotate counterclockwise to remove bulb or clockwise to install bulb.
CAUTION: Most GU10 LED replacement bulbs
!
commonly found in the market are not designed
for use in a cooking environment and might not
perform as advertised. Their usage with this
product is not recommended.
Ducted Installation Only:
Re-install grease fi lters removed in step 1 on page 7, under
"Prepare the Hood".

INSTALL THE LIGHT BULBS

BULB LEAD
GROOVES
(IN SOCKET)
INDENT
2. Gently push upwards and turn clockwise until secure.

INSTALL THE FILTERS

Non-ducted Installation Only:
Purchase two non-ducted fi lters (see part number in Service
parts list). Attach the non-ducted fi lters following instructions
packed with the non-ducted fi lters.
15
"Non-ducted Filters" available by calling
1-844-553-6667
SUCTION
CUP TOOL