DG-102S VoIP Station Gateway
♦ Box Name Enter the IP address of the device. Please note that you must use brackets for this entry (see
example above).
♦ CPE Gateway MAC Address This is the MAC address of the device.
♦ Call Manager IP Address Enter an IP address for the call manager device.
♦ Use DHCP When this is checked ( ), the VoIP will attempt to obtain its IP settings from a DCHP server
located on your LAN.
♦ CPE Gateway IP Address Enter the IP address of the gateway.
♦ IP Netmask Enter a subnet mask for the VoIP gateway.
♦ Default Gateway Enter the IP address of the WAN device (usually a router) you are using to make the
WAN connection.
Click on the Update Flash Memory button at the bottom of the window to save the settings to the device's flash
memory.
54