D-Link DFE-570TX Setup Manual page 16

By Protocol
This option allows you to view totals for each protocol running on the
currently selected device in addition to the total throughput of the device.
By Incoming/Outgoing
This option allows you to view total incoming traffic to the device selected,
total outgoing traffic in addition to the device's total overall throughput.
NOTE: This option is grayed out for Bar Chart type graphs since both Incoming and
You can further customize the graph by selecting or unselecting each breakout component
on the legend below the graph.
Graph Type
DFE-570TX gives you two ways to view throughput data in real time – Line Graphs or Bar
Charts.
Line Graph
The line graph is similar to Performance Monitor in Windows 2000. It gives you the ability to
view data over time for total server throughput, by group, or adapter. Line graphs not only
allow you to see total throughput for each device, but you can also view a variety of detailed
statistics for each device including:
Bar Graph
The bar graph option allows you to view throughput data for all components or protocols on
the server at once as well as overall throughput for the server. The bars in the graph show
both Incoming and outgoing data for each component. With the Bar graph option selected,
you have the ability to see graph detail by Device or by protocol.
NOTE: With Bar chart selected, the Incoming/Outgoing option under graph detail will be
grayed out since this data is already incorporated in the bar charts for both "By
Device" and "By Protocol" options.
D-Link Corporation
outgoing traffic detail is provided in the other two options for Bar graphs.
Incoming and outgoing data
Traffic for each protocol
Traffic for each sub-component (i.e. adapters that make up an array)
DFE-570TX Setup Guide
Page - 16 -