D-Link DFE-570TX Setup Manual page 15

Settings Tab- Adjusting the Graph Settings
DFE-570TX also provides the ability to view detailed traffic statistics in real-time graphs and
reports. The Settings tab allows you to customize how DFE-570TX graphs and displays
throughput data, as well as select which device to graph throughput data on. On this tab
you can:
Scale
To change the scale of any chart or graph, simply selected the appropriate option under
Scale on the Graph Settings Tab. With DFE-570TX you can switch the scale from Packets per
second, Megabits per second or Kbits per second.
Graph Detail
Graph Detail allows you to select how throughput totals are broken out for the currently
selected device. You can choose to display breakout detail in three ways:
By Device
Allows you to view throughput from all of the sub-components that make up
a device. For instance if the currently selected device is a Group (Array),
then breakout totals will be displayed for each adapter that makes up that
group.
D-Link Corporation
Change the scale to Packets/Sec, Mbits/Sec or Kbits/sec.
Further breakout data by Incoming/Outgoing data, per adapter,
or by protocol.
Select between Bar Graph or Line Graph.
Select the device to graph data for.
Figure 9. Chaning the apperance of the graph with the Settings tab.
DFE-570TX Setup Guide
Page - 15 -