Using The Dfe-570Tx Statistics Utility - D-Link DFE-570TX Setup Manual

Using the DFE-570TX Statistics Utility

Launching the DFE-570TX Statistics Utility
At any time, you can instantly gauge the status of any port in a DFE-570TX array and view
performance statistics on each array or individual ports. To view statistics and status
information for DFE-570TX simply launch the main user interface from the Start Menu. If the
default settings were used during setup, DFE-570TX can be found in the D-Link Software
folder off of the Start Menu. The DFE-570TX Statistics Utility consists of 5 tabs on the left
and a graph area on the right. The five tabs include:
Settings – used to configure the appearance of the graph on the right.
Protocol Stats – displays detailed statistics in tabular form for all protocols for the
selected device.
Device Stats – displays detail statistics in tabular form broken out by sub-component.
Status – provides a tree view of all groups and adapters for the server and their current
status.
Advanced – allows for advanced configuration options used by the failover and load
balancing functions.
D-Link Corporation
Figure 5. The DFE-570TX Statistics Utility.
DFE-570TX Setup Guide
Page - 11 -