How To Ping Your Ip Address - D-Link SECURICAM Network DCS-2100+ Manual

Frequently Asked Questions (continued)
A2: The configuration on the Internet Camera image display is incorrect. Through
the Advanced > Image Setting section of the Web management you need to
adjust the image related parameters such as brightness, contrast, hue and
power line frequency for fluorescent light . Please refer to the Advanced >
Image Setting section on Page 49 for detailed information.

How to PING Your IP Address

The PING (Packet Internet Groper) command can determine whether a specific
IP address is accessible by sending a packet to the specific address and waiting
for a reply. It can also provide a very useful tool to confirm if the IP address
conflicts with Internet Camera over the network.
Follow the step-by-step procedure below to utilize the PING command but first
you must disconnect Internet Camera from the network.
Start a DOS window.
Type ping x.x.x.x, where x.x.x.x is the IP address of the Internet Camera.
The replies, as illustrated below, will help diagnose any connection problems.
127