Secondary Schedule - D-Link SECURICAM Network DCS-2100+ Manual

Using IP surveillance Software (continued)
Scheduling (continued)
Digital Input
In the figure above, there are four conditions for the digital input. Check the
condition that you would like to record while the condition triggers.
high
Checking this will trigger recording while the digital input is high.
The technical name for this event is line trigger.
low
Checking this will trigger recording while the digital input is low.
The technical name for this event is line trigger.
rising
Checking this will trigger recording while the digital input is
changing from low to high. The technical name for this event is
edge trigger.
falling
Checking this will trigger recording while the digital input is
changing from high to low. The technical name for this event is
edge trigger.
Schedule in Continuous mode
If you select Continuous mode in the schedule mode selector, it will record
continuously during the schedule that is set up by the user.

Secondary Schedule

Secondary schedule is for recording outside of the primary schedule. The
secondary schedule provides options to record without a specified date or time.
Schedule modes
104