D-Link Securicam Network DCS-2000 Manual page 37

Using the DCS-2000 with an Internet browser
(continued)
Configuration > Advanced > Network
Reset IP Address at next boot
Once the DCS-2000 is configured, this box should be unchecked at all times. If
the box has been checked and the connection is lost, run Installation Wizard
to find the camera's IP address.
General
IP address -
Subnet mask -
Default router -
Primary DNS -
Secondary DNS -
SMTP
SMTP (mail) server 1 -
SMTP account name 1 -
SMTP password 1 -
Recipient email address 1 -
SMTP(mail) server 2 -
Necessary for network identification.
Used to determine if the destination is in the same
subnet. The default value is "255.255.255.0."
The router used to forward frames to destinations
in a different subnet. Invalid router settings will
cause the failure of transmissions to different
subnets.
Primary domain name server that translates names
to IP addresses.
Secondary domain name server to backup the
primary one.
The domain name or IP address of external mail
server.
The user name used to log into your e-mail
account (e.g. jdoe or jdoe@yourisp.com
depending on your ISP).
The password used to log into your e-mail
account. (The password will appear as dots
instead of entered characters.)
The e-mail address of recipients for snapshots
or a system log file. Multiple recipients must be
separated by a semicolon ";"
The domain name or IP address of a secondary
mail server used only if the primary mail server
is unreachable.
37