Makita DGA404 Instruction Manual
Cordless
Hide thumbs
Also See for DGA404:
- Instruction manual (164 pages) ,
- Technical information (15 pages) ,
- Instruction manual (124 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DGA404
Summary of Contents for Makita DGA404
- Page 1 Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Makita DGA504RMJ cerca il tuo prodotto tra le migliori offerte di Elettroutensili INSTRUCTION MANUAL Cordless Angle Grinder DGA404 DGA454 DGA504 015078 IMPORTANT: Read Before Using.
-
Page 2: Specifications
(tri-axial vector sum) battery pack together with household determined according to EN60745: waste material! In observance of the European Directives, Model DGA404 Waste Electric Electronic Work mode : surface grinding with normal side grip Equipment Batteries Vibration emission (a ) : 4.5 m/s... - Page 3 For European countries only tools. Unmodified plugs and matching outlets will EC Declaration of Conformity reduce risk of electric shock. Makita declares that the following Machine(s): Avoid body contact with earthed or grounded Designation of Machine: surfaces such as pipes, radiators, ranges and Cordless Angle Grinder refrigerators.
- Page 4 Do not use a power tool while you are tired or power tool’s operation. If damaged, have the under the influence of drugs, alcohol or power tool repaired before use. Many accidents medication. A moment of inattention while are caused by poorly maintained power tools. operating power tools may result in serious 22.
- Page 5 Operations such polishing Fragments of workpiece or of a broken accessory recommended to be performed with this may fly away and cause injury beyond immediate power tool. Operations for which the power tool area of operation. was not designed may create a hazard and cause 10.
- Page 6 c) Do not position your body in the area where b) Do not position your body in line with and power tool will move if kickback occurs. behind the rotating wheel. When the wheel, at Kickback will propel the tool in direction opposite the point of operation, is moving away from your to the wheel’s movement at the point of snagging.
- Page 7 ENC007-8 types of wheels and the use of such a product may result in serious personal injury. IMPORTANT SAFETY 18. Be careful not to damage the spindle, the INSTRUCTIONS flange (especially the installing surface) or the lock nut. Damage to these parts could result FOR BATTERY CARTRIDGE in wheel breakage.
-
Page 8: Functional Description
FUNCTIONAL DESCRIPTION 1. Slide switch CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 015082 1. Button To start the tool, slide the slide switch toward the "I 2. - Page 9 Automatic speed change function Battery indicator Blinking 1. Mode indicator Protection lock works 015200 In this situation, the tool does not start even if turning the tool off and on. To release the protection lock, remove the battery, set it to the battery charger and wait until the charging finishes.
- Page 10 For tool with locking screw type wheel guard Installing or removing wheel guard (For depressed center wheel, multi disc / 1. Wheel guard abrasive cut-off wheel, diamond wheel) 2. Bearing box 3. Screw WARNING: When using depressed center grinding • wheel/Multi-disc, flex wheel, wire wheel brush, cut- off wheel or diamond wheel, the wheel guard must be fitted on the tool so that the closed side of the...
- Page 11 3. Plastic pad 4. Inner flange 012772 Mount inner flange, abrasive wheel and Ezynut onto the spindle so that Makita Logo on Ezynut faces outside. 1. Shaft lock 015091 Follow instructions for depressed center grinding wheel/Multi-disc but also use plastic pad over wheel.
-
Page 12: Operation
OPERATION WARNING: It should never be necessary to force the tool. The • weight of the tool applies adequate pressure. Forcing and excessive pressure could cause dangerous wheel breakage. ALWAYS replace wheel if tool is dropped while • grinding. NEVER bang or hit grinding disc or wheel onto •... - Page 13 Operation with abrasive cut-off / diamond wheel (optional accessory) 1. Lock nut 2. Abrasive cut-off wheel/diamond wheel 3. Inner flange 4. Wheel guard for abrasive cut-off wheel/diamond wheel 010855 Remove the battery cartridge from the tool and place it upside down allowing easy access to spindle. Mount the inner flange and abrasive cut-off / diamond wheel onto the spindle.
-
Page 14: Maintenance
WARNING: Operation with wire wheel brush When using an abrasive cut-off / diamond wheel, (optional accessory) • be sure to use only the special wheel guard designed for use with cut-off wheels. (In some CAUTION: European countries, when using a diamond wheel, Check operation of wire wheel brush by running •... -
Page 15: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Makita genuine battery and charger •... - Page 16 100 mm (4") model 115 mm (4-1/2") model 125 mm (5") model Grip 36 Wheel Guard (for grinding wheel) Inner flange 42 Inner flange 42 Inner flange 30 Super flange 47 *1 Super flange 47 *1 Depressed center wheel/Flap disc Lock nut 14-45 Lock nut 14-45 Lock nut 10-30...
- Page 20 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885376A220...