26. Lift glass bowl into the light kit. Ensure the clips
on inner edge of the light kit slide inside the glass
bowl. The glass bowl should snap into place
(Fig 26).
27. Feed pull chains through the grommets on each
side of the light kit (Fig 27).
28. Attach the pull chain extensions to fan and light
pull chains (Fig. 28).
Note: When facing the reverse switch, the light pull
chain will be on the left and the fan pull chain will
be on the right. When installing without a light kit,
the pull chain for the light will not be installed.
Fan Pull Chain
Extension
Assembly is complete. Turn on the power supply to
the fan.
LIGHT KIT INSTALLATION
Light Pull Chain
Extension
Fig. 26
Light Kit
Fig. 27
Fig. 28
Light
Pull Chain
15
Clip
Glass Bowl
Grommet
Pull Chain
Fan
Pull Chain