Cisco C390 Quick Start Manual page 11

Run the Active Directory Wizard (Optional)
Check for Available Upgrades
After running the System Setup Wizard in the web interface, the Active Directory
Wizard appears. If you are running an Active Directory server on your network,
use the Active Directory Wizard to configure an LDAP server profile for the
Active Directory server.
If you are not using Active Directory or want to configure it later, click Skip this
Step. You can run the Active Directory Wizard later by going to System
Administration > LDAP. Select the "using Active Directory Wizard" check box,
and then click Add LDAP Server Profile.
You will need the hostname and login information for your Active
Note
Directory account to run the Active Directory Wizard.
Commit any changes you make in the GUI by clicking Commit
Note
Changes. This button appears if you have any uncommitted changes
that need to be saved.
After logging in to the appliance, look at the top of the web browser window for
an upgrade notification (or for a notice in the command-line interface.) If an
upgrade is available, evaluate whether you should install it.
Details about each release are available in the release notes for that Async OS
version.
11