Assembly/Dismantlement Procedures; Dismantlement Procedure - Philips Fisio 120 VOICE Service Manual

Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans

9.0 ASSEMBLY/DISMANTLEMENT PROCEDURES

During dismantlement and assembly operations, an antistatic bracelet must be used.
9.1

Dismantlement Procedure

9.1.1 Removing the battery
Press on the top of the battery cover, then push the cover in direction as indicated in diagram below in
order to remove it.
Remove the battery by lifting both the bottom clip and the battery upward (1), and pushing it downward (2).
9.1.2 Removing the front cover/keypad
Hold the transceiver firmly, Follow the below Picture 1 and 2.
Take the front cabinet from the sub-assembly and remove the keypad.
Ó PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Picture 1
Service Repair Support
COMPANY RESTRICTED
VY-V-640-120-2
Page : 35 of 45
Language : EN
Date : 23/04/02
Picture 2
VY-V-640-