uuIndicatorsu
Indicator
Name
Lane
Departure
Warning
(LDW)
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
84
On/Blinking
Comes on for a few seconds
●
when you turn the ignition
switch to ON
(
w
*1
, then goes
off.
Comes on if there is a problem
●
with the LDW system.
Blinks when your vehicle is too
●
close to the lane lines. The
beeper sounds.
Comes on when the LDW
●
system shuts itself off.
*
Explanation
Stays on constantly - Have your vehicle checked
●
by a dealer.
Blinks while driving - Take appropriate action to
●
keep your vehicle within the lane lines.
Stays on - The temperature inside the LDW
●
camera is too high.
The system activates when the temperature inside
the camera cools down.
2 LDW Camera P. 352
Stays on - The area around the camera is blocked
●
by dirt, mud, etc. Stop your vehicle in a safe place,
and wipe it off with a soft cloth.
Have your vehicle checked by a dealer if the
●
indicator and message come back on after you
cleaned the area around the camera.
2 LDW Camera P. 352
Message
—