Replacing Light Bulbs - Honda 2017 HR-V Owner's Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High/Low beam headlight: 60/55 W (HB2 for halogen bulb type)
■
High/Low Beam Headlight
Rubber Weather Seal
Coupler
Hold-Down Wire
Slot
Bulb
1. Remove the coupler.
2. Remove the rubber weather seal.
3. Remove the hold-down wire, then remove
the bulb.
4. Insert a new bulb.
5. Reinstall the hold-down wire. Hook the end
of the wire on the knob in the slot.
6. Reinstall the rubber weather seal.
7. Insert the coupler into the connector of the
bulb.
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the cargo area, have the aiming
readjusted at a dealer or by a qualified technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
397