Honda 2017 HR-V Owner's Manual page 437

■
Getting Ready to Replace the Flat Tire
Floor Lid
2WD models
Jack
Spare Tire
Tool Case
AWD models
Spare Tire
Tool Case
1. Open the cargo area floor lid.
2. Take the tool case out of the cargo area.
2WD models
Take the wheel nut wrench, jack handle bar
and jack out of the tool case.
AWD models
Take the wheel nut wrench and jack handle
bar out of the tool case.
All models
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
uuIf a Tire Goes FlatuChanging a Flat Tire
1Getting Ready to Replace the Flat Tire
The wheel nut wrench supplied with your vehicle is
specially adapted to fit the holder shaft. Do not use
any other tool.
The shape of the tool case varies by model.
Continued 435