4-10 Configuring Your Server
Peripheral Configuration
IMPORTANT:
Note that the interrupt and/or base I/O address are not overlapped
with others. If the value set for the interrupt or base I/O address is
used in another resource, the yellow asterisk (*) appears. Reset any
item with the yellow asterisk properly.
If N8403-026 RAID controller is installed, "Serial ATA", "SATA
Controller Mode Option", "SATA AHCI", and "SATA RAID" are
not displayed.
Option
Serial Port B
Base I/O
address
Interrupt
Serial ATA
SATA Controller
Mode Option
SATA AHCI
SATA RAID
Parameter
Description
Disabled
Selects whether serial port B is enabled or
[Enabled]
disabled.
3F8h
Selects the base I/O address for serial port
[2F8h]
A.
3E8h
2E8h
[IRQ 3]
Selects the interrupt for a serial port A.
IRQ 4
Disabled
Selects whether the serial ATA is enabled or
[Enabled]
disabled.
Compatible
Selects an operation mode of onboard
[Enhanced]
SATA controller. Displayed only when Serial
ATA is enabled.
Compatible mode:
SATA drives are automatically detected
and recognized as legacy mode.
Enhanced mode:
SATA drives are automatically detected
and recognized as native mode.
Disabled
Selects whether AHCI (Advanced Host
[Enabled]
Controller Interface) is enabled or disabled.
This item appears only when "SATA RAID"
is set to "Disabled".
Disabled
Selects whether RAID feature of onboard
[Enabled]
SATA controller is enabled or disabled.
Your Setting
[
]: Factory-set