Table of Contents
Advertisement
B-72 Installing the Operating System
Updating the System
IMPORTANT:
network driver to be shared. If not, assign the TS client to make it
shared.
1.
Log on to the system by the account with administrator authority to TS client (such as
administrator).
2.
Insert the NEC EXPRESSBUILDER DVD into the USB DVD-ROM drive of the TS
client.
If the menu appears on the TS client screen, terminate the menu.
3.
Select [Run] from the [Start] menu, enter "DVD-ROM drive name on TS
client:\003\win\winnt\dotnet\update.vbs" on the [Open] box, and click [OK].
Then advance the processing depending on the messages appearing on the TS client
screen.
If the following screen appears, click [Close].
IMPORTANT:
Perform the re-connection to the CPU blade after about five minutes
have passed. While the system update is applied, the terminal service
connection is automatically disconnected and the CPU blade is
restarted.
During the "Updating the System", the following message may be
shown, but there is no impact to the operation.
Do not click [cancel] since it may be taken away after a few seconds
Make sure that the TS client CD-ROM is assigned to a
Advertisement
Table of Contents
