Units of Measure
Set the unit of measure to inches or millimeters.
To set the unit of measure:
1. From the home screen, tap Settings.
2. Tap System Configuration, then Measurement Units.
3. Tap either Inches or Millimeters.
4. Tap
Date and Time
Set the printer's clock to the current date and time.
To set the date and time:
1. From the home screen, tap Settings.
2. Tap System Configuration, then Date and Time. The left side of the screen displays the
current settings.
3. To change the settings, tap the controls on the right.
•
•
•
4. Tap
Printer Name
The printer name is displayed when a computer searches for the printer on a Wi-Fi connection.
To change the printer name:
1. With the printer turned on, tap Settings.
2. Tap Connection, and then tap Printer Name. The printer displays a keyboard.
The printer name can only contain the characters A-Z, a-z, 0-9, and -. Regardless of the
keyboards you have enabled for your printer, the printer displays a keyboard with the allowed
characters.
Wraptor A6200 User Manual
to go back to the previous screen.
Use 24-hour format: Tap the switch to change between 24-hour format and 12-hour format
with AM and PM. When the switch is red, the printer uses 12-hour format. When the switch is
green, the printer uses 24-hour format.
Set date: Tap to display date controls. To change the date, either tap on an elements and select
a new value, or tap the arrows above or below an element.
Set time: Tap to display time controls. To change the time, either tap on an elements and select
a new value, or tap the arrows above or below an element.
to go back to the previous screen.
Setup
Printer Settings
10