38
SymNet1
User Manual
Flash recovery system
Should the normal upgrade procedure fail or the system fail to boot up, the Flash recovery system will
automatically start to give you a chance to restore normal system functionality.
Flash recovery over the Ethernet
To restore system functionality using Flash recovery over the Ethernet, do the following:
1. Launch your browser software.
2. Enter the IP address of the SymNet1 in the address field of the browser and enter the username/
password.
3. The Recovery page (Figure 28) appears.
Figure 28. Recovery page
4. Click Browse and select the normal system bin file. Click Send file.
5. Click the Confirm and Reboot buttons to restart the unit.
6. The unit should reboot to normal operation.