16
SymNet1
User Manual
Configuration page
Click the Configure link to launch the Configuration page (Figure 10).
Figure 10. Configuration page
The Configuration page allows you to remotely modify the following settings of the SymNet1:
•
Network settings (see
•
Streaming settings (see
•
Camera settings (see
•
Serial settings (see
•
Alarm setup (see
•
Password settings (see
•
Network time protocol settings (see
•
Factory reset (see
Network settings
on page 17)
Streaming settings
Camera settings
on page 23)
2 Field Rates equals 1 Frame.
Alarm Setup
on page 30)
Password settings
Network time protocol settings
Factory reset
on page 32)
on page 18)
on page 25)
on page 31).
on page 32)