Section 3: Configuration
Enter the type of authentication used by your read-only SNMP server.
Authentication
Type:
Enter the authentication password used for your read-only SNMP server.
Authentication
Password:
Enter the encryption password used for your read-only SNMP server.
Encryption
Password:
Enable SNMP traps support of the camera.
Traps:
Enter IP address of SNMP server where the trap message will be sent.
Trap address:
Enter a name for trap community.
Trap
community:
Enter IP address of SNMP server where the trap message will be sent.
Trap address 2:
Enter a name for trap community.
Trap
community 2:
D-Link DCS-6517 User Manual
67