Honeywell Οva-OmniLED R S Instruction Manual

Dimensional Drawings:
21,5mm
Installation:
1
To install this luminaire, a hole Ø 70 mm must be cut in the suspended ceiling. For correct mounting,
observe the light direction
Step 1: Connect the 24V cables to the terminal blocks, C1 and C2. Power supply cables cross section should
be 0.8 – 3 mm . After the connection of the cables, secure them with the provided cable tie. Place the
main unit on the false ceiling. For spot installation see the next page.
The light source contained in this luminary shall only be replaced by the manufacturer, or his
agent, or a similar qualified person.
NOTE! The light source is non-user replaceable.
At the end of their useful life the packaging and product
should be disposed of via a suitable recycling centre.
Do not dispose of with your normal household waste.
Do not burn.
Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway
Ova/OmniLED R Spot
70mm
1
2
Centralized
175mm
100mm
C1 C2
37mm
http://www.hls-nordic.com
GB