Advertisement
Available languages
Available languages
Quick Links
Dimensional drawings:
Installation:
To install this luminaire, a hole Ø 70 mm must be cut in the suspended ceiling. For correct mounting, observe
the light direction, use the corresponding lens retaining cover depending on the lens you will use.
A 5 lux lens (part no. 2900XX.STR)
is also available for order.
Step 1: Put the lens on the retaining
cover.
Step 2: Insert the cover with the lens on
the luminary. Be careful not to
touch the LED with your hand.
3
B
6
Step 3: Unfasten the mounting screws, A for battery compartment and B for electrical connections.
Remove the respective covers.
Step 4: Connect the battery and place the battery inside the compartment. Refit the cover and fasten the
removed screw (A) in step 3.
Step 5: Connect the mains cables to the terminal blocks. L for live wire N for neutral. The ground terminal is
optional. The C1 and C2 terminals are used for elBus communication (optional), DALI communication
(optional) or voltage free contact (optional). After the connection of the cables, secure them with the
provided ties. Refit the cover (B) and fasten the removed screw in step 3. Place the main unit on the
false ceiling and follow the next steps.
Step 6: Bend one spring, to get into the holes of the suspended ceiling.
Step 7: Bend the other spring and push the luminaire upwards until it is securely mounted.
Step 8: The device is now ready to operate. The TEST button is located next to the indication diodes.
Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway
Ova/OmniLED R
Spot
1
4
A
7
Note:
In case of mains power disconnection for a period of more than two
months, the battery must be disconnected.
2
5
8
http://www.hls-nordic.com
GB
Advertisement
Related Manuals for Honeywell Ova/OmniLED R
Summary of Contents for Honeywell Ova/OmniLED R
- Page 1 Step 8: The device is now ready to operate. The TEST button is located next to the indication diodes. Note: In case of mains power disconnection for a period of more than two months, the battery must be disconnected. Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com...
-
Page 2: Battery Replacement
Do not burn. The Ova/OmniLED R Spot is a self-contained non-maintained luminaire with selftest function. Selftest functions Every 15 days the luminaire will perform an emergency operation test, this will light the white LED for approx. - Page 3 Pkt. 8: Armaturen er nå klar til bruk. TEST-knappen er plassert ved siden av indikatordiodene. Merk: Dersom nettspenningen skal frakobles for lengre perioder enn 2 måneder, må batteriet frakobles. Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com...
- Page 4 Ikke brenn disse eller kast sammen med husholdningsavfallet. Ova/OmniLED R Spot er et desentralisert ledelys med selvtestfunksjoner. Selvtestfunksjoner Hver 15. dag gjennomfører nødlysarmaturen en kort selvtest av nødlysfunksjonen. Den hvite lysdioden tennes i 3 sekunder. Den røde lysdioden blinker i denne perioden.
-
Page 5: Installation
Steg 8: Armaturen är nu klar att användas. TEST-knappen är placerad vid sidan av indikeringsdioderna. Notera: Om nätspänningen kopplas bort för en längre period än 2 månader, skall batteriet frånkopplas. Honeywell Life Safety AS, Po. Box 3514, N-3007 Drammen, Norway http://www.hls-nordic.com... - Page 6 återvinnas. Får ej brännas eller kastas tillsammans med hushållsavfall. Ova/OmniLED R Spot är en decentraliserad ledbelysning med självtestsystem. Självtestsystem Var 15:e dag genomför armaturen ett kort självtest av nödljusfunktionen. Testet pågår under ca 3 sekunder. Armaturens LED lampa tänds upp och den röda indikeringsdioden blinkar under test- perioden.