AEG SRR 4313 CD/MP3 Instruction Manual & Guarantee page 39

• If the device is not used for a long period of time, remove the
batteries to avoid the spilling of battery acid.
• If the power cable is connected, the batteries are switched
off automatically.
• Different battery types or new and used batteries must not
be used together.
• Then close the battery lid.
Warning: batteries are not to be disposed of together with
domestic wastes. Dispose of the used batteries at the relevant
collection bin or at your dealer's.
Never throw batteries into the fi re.
CD deck transport protection
• Please open the CD compartment (11) by pressing the
PUSH/OPEN button (12).
• Remove the transport protection from the CD player if
present before use.
Headphone Socket (7)
Please use headphones with a 3.5 mm stereo jack plug; these
should be inserted into the
then switched off.
BEAT CUT A/B (26)
When recording from AM transmitters there may be interference
from frequency overlays. It may be impossible to remove these
by turning the BEAT CUT switch.
Volume
The desired volume can be sent using the VOLUME regulator (5).
Switch-off
The machine is switched off when the function selector switch
(6) is turned to the TAPE position. The POWER (1) control lamp
goes off. Unplug the device.
Listening to the Radio
1. Turn the function selector switch (6) to the RADIO position.
VHF (Stereo) = FM ST., VHF = FM,
Medium wave = AM (Mono)
2. Tune in the desired station with the station adjustment knob
TUNING (8).
3. The FM.ST control lamp (2) only lights up when you have
selected FM stereo and the station is being received in ste-
reo quality. If reception is too weak and there is noise on the
station being received, this lamp will fl icker. Where reception
is bad we recommend switching to FM.
4. For VHF/FM mode pull out the telescopic antenna (30) and
turn it to improve reception.
5. An aerial is integrated into the device for the reception of
AM stations. The machine can be aligned to the station by
turning it. In this frequency band programs are transmitted in
„mono" only.
05-SRR 4313 AEG 39
socket. The loudspeakers are
Cassette Operation
Playing Cassettes
1. Turn the function selector switch (6) to the TAPE position.
2. Press the / stop/eject button (21) to open the cassette
compartment (19).
3. Insert a recorded audiocassette into the compartment with
the tape opening facing upwards and the side you wish to
listen to facing the front (full spool to the right). Then close
the cassette compartment (19) again.
4. Press the playback key (24) to listen to the tape.
5. With the / stop/eject key you can stop playback.
6. Wind the tape forwards or backwards if necessary in the
direction of the arrow keys
= forwards (22),
7. Always press the / stop/eject key (21) when changing
the direction or stopping the tape. This prevents damage to
the machine and the tape.
8. If the / stop/eject button is pressed again the fl ap of
the cassette compartment opens.
9. In order to interrupt playback briefl y, press the II pause
button (20). Pressing again continues playback.
Recording Cassettes
1. Insert an audiocassette with the side on which you wish to
record facing forwards (full reel on the right). Ensure that
the cassette is not copy-protected (the copy protection tab
on the top narrow side of the cassette must not have been
removed).
2. Select the source from which you wish to record with the
function switch (6) and then start playback from this source
if necessary. The sound source which you are listening to
is the one from which the recording is made. The recording
level is controlled automatically. Any changes to the sound
and volume do not affect the recording.
b
3. Please press the record button (25) (the
button is automatically pressed down at the same time).
Recording now begins. All previous recordings are automati-
cally erased.
4. The recording can be interrupted briefl y using the II pause
key (20), or stopped by means of the
button (21).
Playing CDs/MP3
This is how you play a CD
1. Turn the function selector switch (6) to the „CD" position.
2. Please open the CD compartment (11) by pressing the
PUSH/OPEN button (12).
3. Insert a CD with the printed side facing up and close the CD
deck.
4. The CD will play from the fi rst title. The track currently being
played, or MP3 are shown in the display (13).
5. In order to remove a CD, please press the
(17), open the CD compartment PUSH/OPEN (12) and lift
the CD out carefully.
Always keep the CD deck closed.
= reverse (23).
playback
/ stop/eject
STOP key
39
22.06.2006, 8:16:14 Uhr