Parameter List; Command Parameter; System Parameter List - Casio PX-110 Function Manual

Part V

Parameter List

These lists show the parameters that can be transferred individually using System Exclusive Messages.
Note 1: Any parameter that has "r" to the right of its Parameter ID number is a read-only parameter that can be
•
used for obtaining status information only.
A parameter with "w" next to its Parameter ID is a write-only parameter, which is used for commands, etc.
Note 2: Except for the "Setting Value" column, all values in the System Exclusive Format table and the Parameter
•
Lists are hexadecimal, unless specifically noted otherwise.
Note 3: Receipt of a value outside a specified range causes the value marked "Default" to be used instead.
•
18

Command Parameter

The parameters defined here mainly execute commands and indicates statuses. Values indicate the pointer to a
command or a status.
18.1

System Parameter List

System Exclusive Format
Field Value
01 SYSEX F0
02 MAN 44
03 MOD 11,02
dev
04 00 to 1F, or 7F
act
05 00(IPC), 01(IPR)
cat
06 Command = 0
prm
07 00-7F
ilen/dlen 0 / bit size - 1
08
ps
09 LSB,MSB = 00, 00
index
10 00
data
11 See the Parameter List.
sum
12 None
13 EOX F7
39