Expression (0Bh); General Use Controller 1 Through 8 (10H Through 13H, 50H Through 53H) Format - Casio PX-110 Function Manual

8.6

Expression (0BH)

Format
Message Format: BnH 0BH vvH
n: MIDI Channel Number
vv: Value (Note1)
Note 1:
The setting value matches the value that is sent and received.
Send
This message is not sent when the Instrument is operated.
Receive
Receipt changes the Expression value.
8.7

General Use Controller 1 through 8 (10H through 13H, 50H through 53H) Format

Format
Message Format: BnH 10H vvH
Note 1:MIDI Channel Number
The MIDI channel for manipulating DSP parameters with control change messages is called the "Global Channel".
The initial factory default Global Channel is Channel 1.
The Global Channel cannot be changed with an Instrument operation. You need to use a System Exclusive
Message to change the Global Channel. For details about messages, "Global Channel" under "19.1 Patch Common
Parameter List".
Note 2:Value
The range for a value that can be sent by any of the parameters is 0 to 127. Note, however, that the parameter
values that can actually be set and the corresponding send value depend on the parameter.
The same values are used for when manipulating DSP parameters with System Exclusive Messages. For more
information, see the "Part VII DSP Parameter List".
Send
This message is not sent when the Instrument is operated.
Receive
Receipt changes the DSP Parameter value. Any message received that corresponds to a parameter whose number
exceeds the number of parameters for the currently selected DSP is ignored.
BnH 11H vvH
BnH 12H vvH
BnH 13H vvH
BnH 50H vvH
BnH 51H vvH
BnH 52H vvH
BnH 53H vvH
n:MIDI Channel Number (Note1)
vv:Value (Note2)
DSP Parameter 0
DSP Parameter 1
DSP Parameter 2
DSP Parameter 3
DSP Parameter 4
DSP Parameter 5
DSP Parameter 6
DSP Parameter 7
11