Remote Control Code - Canon LV-7585 User Manual

Part Names and Functions

Remote Control Code

The eight different remote control codes (Code 1–Code 8) are assigned to this projector. Switching the
remote control codes prevents interference from other remote control units when several projectors or video
equipment next to each other are operated at the same time. Change the remote control code for the projector
first before changing that for the remote control unit. See "Remote control" in the Setting Menu on page 51.
1
Press and hold the MENU and a number button (1–8)
for more than 5 seconds to switch between the codes.
2
To initialize the remote control code, slide the RESET/
ON/ALL-OFF switch to "RESET, " and then to "ON. " The
initial code is set to Code 1.
16
Press and hold the MENU and a number button
(1–8) that corresponds to the remote control code
for more than 5 seconds to switch between the
codes.
MENU button
Number buttons
RESET/ON/ALL
OFF Switch