HIKVISION DS-K3B411X Series Quick Start Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Automatic Barriers
  5. DS-K3B411X Series
  6. Quick start manual

HIKVISION DS-K3B411X Series Quick Start Manual

Swing barrier
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K3B411X Series Swing Barrier
Quick Start Guide

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-K3B411X Series

Summary of Contents for HIKVISION DS-K3B411X Series

  • Page 1 DS-K3B411X Series Swing Barrier Quick Start Guide...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K3B411X Series Swing Barrier Quick Start Guide Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 5 DS-K3B411X Series Swing Barrier Quick Start Guide under the EMC Directive 2014/30/EU, LVD Directive 2014/35/EU, the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 6 DS-K3B411X Series Swing Barrier Quick Start Guide Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 7 DS-K3B411X Series Swing Barrier Quick Start Guide • Do not ingest battery, Chemical Burn Hazard. This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
  • Page 8 DS-K3B411X Series Swing Barrier Quick Start Guide • Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
  • Page 9 DS-K3B411X Series Swing Barrier Quick Start Guide Available Models Product Name Model Description Swing Barrier DS-K3B411X-L Left Pedestal DS-K3B411X-M Middle Pedestal DS-K3B411X-R Right Pedestal DS-K3B411X-LS Left Pedestal (No Barrier) DS-K3B411X-MS Middle Pedestal (Single Barrier) Scan the QR code to get User Manual of Swing Barrier. Note that mobile data charges may apply if Wi-Fi is unavailable.

  • Page 10: Table Of Contents

    DS-K3B411X Series Swing Barrier Quick Start Guide Contents Chapter 1 Overview ........................1 1.1 Introduction ........................... 1 1.2 Main Features ........................1 Chapter 2 System Wiring ......................3 Chapter 3 Installation ......................... 6 3.1 Disassemble Pedestals ......................6 3.2 Install Pedestals ........................6 Chapter 4 General Wiring ......................
  • Page 11 DS-K3B411X Series Swing Barrier Quick Start Guide 5.3 Switch Relay Output Mode (NO/NC) ..................39 5.3.1 Barrier Control Relay Output Mode ................39 5.3.2 Alarm Relay Output Mode (NO/NC) ................40 Chapter 6 Activation ......................... 42 6.1 Activate via SADP ......................... 42 6.2 Activate Device via Client Software ..................

  • Page 12: Chapter 1 Overview

    DS-K3B411X Series Swing Barrier Quick Start Guide Chapter 1 Overview 1.1 Introduction Figure 1-1 Appearance The swing barrier is designed to detect unauthorized entrance or exit. By adopting the swing barrier integratedly with the access control system, personnel should authenticate to pass through the lane via swiping IC or ID card, scanning QR code, etc.
  • Page 13 DS-K3B411X Series Swing Barrier Quick Start Guide When the fire alarm is triggered, the barrier will be open automatically for emergency evacuation • Valid passing duration settings System will cancel the passing permission if a person does not pass through the lane within the valid passing duration •...

  • Page 14: Chapter 2 System Wiring

    DS-K3B411X Series Swing Barrier Quick Start Guide Chapter 2 System Wiring The preparation before installation and general wiring. Steps 1. Draw a central line on the installation surface of the left or right pedestal. 2. Draw other parallel lines for installing the other pedestals.
  • Page 15 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 2-2 System Wiring Diagram (General Wiring) Note • The supplied interconnecting cable length is 3.75 m. If you need a longer one, you can buy a new accessory. • The suggested inner diameter of the low voltage conduit is larger than 30 mm.
  • Page 16 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 2-3 Wire Face Recognition Terminal Note • The face recognition terminal installed on the left pedestal will gain power from the sub switch, which should connect to high voltage. • The suggested inner diameter of the low voltage conduit is larger than 30 mm.

  • Page 17: Chapter 3 Installation

    DS-K3B411X Series Swing Barrier Quick Start Guide Chapter 3 Installation 3.1 Disassemble Pedestals Before installation, you should use the key to open the pedestals. View the pictures below to find the lock holes. Figure 3-1 Lock Holes 3.2 Install Pedestals...
  • Page 18 DS-K3B411X Series Swing Barrier Quick Start Guide • No face recognition terminal installed: If the installation area is too close to the wall, make sure the distance between the pedestal and the wall should be more than 20 mm, or the surface may be scratched.
  • Page 19 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 3-3 Installation Distance (With Face Recognition Terminal) The dimension is as follows.
  • Page 20 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 3-4 Double-Barrier Dimension Figure 3-5 Single-Barrier Dimension 1. Prepare for the installation tools, check the components, and prepare for the installation base. 2. Drill holes on the ground according to the installation holes on the pedestals and insert the expansion sleeves.
  • Page 21 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 3-6 Installation Footprint...

  • Page 22: Chapter 4 General Wiring

    DS-K3B411X Series Swing Barrier Quick Start Guide Chapter 4 General Wiring 4.1 Components Introduction By default, basic components of the turnstile are connected well. The pedestals can communicate by wiring the interconnecting cables. And the turnstile supports wiring the AC electric supply for the whole system's power supply.

  • Page 23: Wiring Electric Supply

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-2 Components 2 Note • If the turnstile contains two lanes, standing at the entrance position, the IR boards on the left pedestal are the IR sending boards. The IR boards on the right pedestal are the IR receiving boards.

  • Page 24: Wire Interconnecting Cable

    DS-K3B411X Series Swing Barrier Quick Start Guide Note • The cable bare part should be no more than 8 mm. It is suggested that you can immerse the bare part into the liquid tin. If possible, wear an insulation cap at the end of the bare cable.

  • Page 25: Pull Interconnecting Cable

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-3 Cable Hole of Interconnecting Cable Follow the instructions below to connect the interconnecting cable. Figure 4-4 Connect Interconnecting Cable 4.3.1 Pull Interconnecting Cable Steps 1. Use the key to unlock the upper lock of the pedestals and remove the top cover.
  • Page 26 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-5 Dissemble Top Cover 2. Dissemble the card presenting board.
  • Page 27 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-6 Dissemble Card Presenting Board 3. Dissemble the card reader module.
  • Page 28 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-7 Dissemble Card Reader Module 4. Pull the interconnecting cable out from the bottom up with pull-out tool, and other wiring operations can be performed. Note Interconnecting cable includes a network cable and a power supply cable of 24 V.

  • Page 29: Wire Network Switch (Optional)

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-8 Pull out Interconnecting Cable 4.4 Wire Network Switch (Optional) Connect the network cable and the network switch. Steps 1. Use the key to open the top cover of the pedestal.
  • Page 30 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-9 Open Top Cover 2. Attach the network switch to the position shown in the figure with adhesive.

  • Page 31: Terminal Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-10 Network Switch Position 3. Lead out the 12 V power supply from the power switch and connect it to the switch power interface. 4. Connect the network cable according to your actual needs.

  • Page 32: Sub Control Board Terminal Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-11 Main Control Board Terminal 4.5.2 Sub Control Board Terminal Description The sub lane control board contains power input, BUS interface, interconnecting interface, supercapacitor interface, IR interface, barrier position control board interface and motor drive interface.
  • Page 33 DS-K3B411X Series Swing Barrier Quick Start Guide Table 4-1 BUS Terminal in Main Lane Controller Terminal Name Description Lane Controller Light Board 1 Connects lane controller light board 1 Lane Controller Light Board 2 Connects lane controller light board 2...

  • Page 34: Access Control Board Terminal Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Terminal Name Description Blue 485F/232F-: card reader RS-485F-/RS-232F- access terminal Note Black GND: grounding External face recognition terminal is recommended to access. Table 4-3 BUS Terminal in Sub Lane Controller (Middle Pedestal) Terminal Name...
  • Page 35 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-13 Access Control Board Terminal Table 4-4 Access Control Board Terminal Description Access Control Board Terminal Description Power Output 1 +12 V 12 VDC Power Output Grounding RS-485 Interface RS-485 C+ Connect to Card Reader RS485+ •...
  • Page 36 DS-K3B411X Series Swing Barrier Quick Start Guide Access Control Board Terminal Description control board corresponds to the exit card reader. • If the user configured a guest card, the exit needs to be connected to two card readers, one with the DIP...
  • Page 37 DS-K3B411X Series Swing Barrier Quick Start Guide Access Control Board Terminal Description RS-232 Interface Grounding • This is the RS-232 RS-232 G- Connect to RS-232G- interface, RS-232 G+ Connect to Card Reader RS-232G+ which cannot be switched Grounding by dialing.
  • Page 38 DS-K3B411X Series Swing Barrier Quick Start Guide Access Control Board Terminal Description Event Input Event Alarm Input 1 The event alarm input Grounding hardware Event Alarm Input 2 interface is remaining open, and only supports access to remaining open signals,...

  • Page 39: Access Control Board Serial Port Id Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Access Control Board Terminal Description the third-party barrier switch. D1 controls the door opening for ordinary entrance, and D2 controls the door opening for ordinary exit. Alarm Output NO/NC1 Alarm Output Relay 1 (Dry Contact)
  • Page 40 DS-K3B411X Series Swing Barrier Quick Start Guide Figure 4-14 DIP Switch on Access Control Board DIP A can set the device mode, DIP 2 to 5 can set the RS-485/RS-232 interface, and DIP B can also be used to initialize the device.
  • Page 41 DS-K3B411X Series Swing Barrier Quick Start Guide The corresponding functions of different DIP Switch are described as follows: Device Mode UART No. Function Binary Value DIP A 1 to 2: Work Normal Mode Mode Test Mode 3: Memory Mode Enable Memory...
  • Page 42 DS-K3B411X Series Swing Barrier Quick Start Guide Device Mode UART No. Function Binary Value Free Entrance and Prohibit Exit Prohibited Bi- direction Prohibit Entrance and Controlled Exit Prohibit Entrance and Free Exit DIP B 1 to 3 UART 5 ON: UART 5 is RS-...
  • Page 43 DS-K3B411X Series Swing Barrier Quick Start Guide Device Mode UART No. Function Binary Value 4 to 6 ON: UART 3 is RS- 485C Interface Reserved Reserved Note Switch 1 to 3, 4 to 6, 7, and 8 of DIP B, DIP C, DIP D, and DIP E cannot be turned ON at the same time.

  • Page 44: Rs-485 Wiring

    DS-K3B411X Series Swing Barrier Quick Start Guide 4.5.6 RS-485 Wiring Note • The RS-485 interfaces are for connecting ID card reader, IC card reader, QR code scanner, card reader, card recycler, text screen, and face recognition terminal. Take the wiring of RS-485 card reader as an example.

  • Page 45: Rs-232 Wiring

    DS-K3B411X Series Swing Barrier Quick Start Guide 4.5.7 RS-232 Wiring Note • Access control board of pedestal can connect QR code scanner, card recycler, text screen and face recognition terminal via RS-232 interface. • For details about text screen, see Configuring Screen Parameters in User Manual of iVMS-4200 AC Client Software.
  • Page 46 DS-K3B411X Series Swing Barrier Quick Start Guide Note Use the jumper cap to switch the relay status. For details, see Barrier Control Relay Output Mode . Entering Wiring Exiting Wiring...

  • Page 47: Alarm Output Wiring

    DS-K3B411X Series Swing Barrier Quick Start Guide 4.5.9 Alarm Output Wiring Note For details about changing the relay output status via the jumper cap, see Alarm Relay Output Mode (NO/NC) .

  • Page 48: Chapter 5 Device Settings

    DS-K3B411X Series Swing Barrier Quick Start Guide Chapter 5 Device Settings After installation and wiring completed, the turnstile will learn the open and closed position automatically. After the learning, the turnstile is in the normal mode. You can also set the turnstile to test mode,...

  • Page 49: Initialize Device

    DS-K3B411X Series Swing Barrier Quick Start Guide The keyfob's indicator of the will flash twice if the pairing is completed. 5. Set the No.4 switch to the OFF side, and reboot the turnstile to take effect. Note Only one turnstile can pair the keyfob. If multiple turnstiles are in the pairing mode, the keyfob will select only one of them to pair.

  • Page 50: Switch Relay Output Mode (No/Nc)

    DS-K3B411X Series Swing Barrier Quick Start Guide 5.3 Switch Relay Output Mode (NO/NC) 5.3.1 Barrier Control Relay Output Mode The jumper cap of the barrier control relay on the access control board is as below: Figure 5-2 Jumper Cap Location (Barrier Control Relay Output Mode)

  • Page 51: Alarm Relay Output Mode (No/Nc)

    DS-K3B411X Series Swing Barrier Quick Start Guide Figure 5-4 Barrier Closing (NC) Note The default status is NC. 5.3.2 Alarm Relay Output Mode (NO/NC) The jumper cap of the alarm relay on the access control board is as below: Figure 5-5 Jumper Cap Location (Alarm Relay Output Mode)
  • Page 52 DS-K3B411X Series Swing Barrier Quick Start Guide The jumper cap position of alarm closing (NC) is as below: Figure 5-7 Alarm Closing (NC) Note The default status is NO.

  • Page 53: Chapter 6 Activation

    • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 54: Activate Device Via Client Software

    DS-K3B411X Series Swing Barrier Quick Start Guide Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.
  • Page 55 DS-K3B411X Series Swing Barrier Quick Start Guide three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

  • Page 56: Appendix A. Dip Switch Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Appendix A. DIP Switch Description The DIP switch is on the main lane control board. The left side to the right side is from the low bit to the high bit. When the switch is towards ON, it means the switch is enabled, otherwise, the switch is off. If you set the DIP switch like the figure displayed below, its binary value is 00001100, and its decimal value is 12.

  • Page 57: Appendix B. Event And Alarm Type

    DS-K3B411X Series Swing Barrier Quick Start Guide Appendix B. Event and Alarm Type Event Alarm Type Tailgating Visual and Audible Reverse Passing Visual and Audible Force Accessing None Climb over Barrier Visual and Audible Overstay Visual and Audible Passing Timeout...

  • Page 58: Appendix C. Table Of Audio Index Related Content

    DS-K3B411X Series Swing Barrier Quick Start Guide Appendix C. Table of Audio Index Related Content Index Content Authenticated. Card No. does not exist. Card No. and fingerprint mismatch. Climbing over the barrier. Reverse passing. Passing timeout. Intrusion. Force accessing. Tailgating.

  • Page 59: Appendix D. Error Code Description

    DS-K3B411X Series Swing Barrier Quick Start Guide Appendix D. Error Code Description The swing barrier will display the error code on the seven-segment display if error occurred. Refer to the table below to find the description of each number. Error Reason...
  • Page 60 DS-K3B411X Series Swing Barrier Quick Start Guide Error Reason Code Error Reason Code The Third IR Beam on Lower IR Lower IR Board 8 Offline Board Triggered The Fourth IR Beam on Lower Lower IR Board 9 Offline IR Board Triggered...

  • Page 61: Appendix E. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 62 UD21908B...

This manual is also suitable for:

Ds-k3b411x-lDs-k3b411x-mDs-k3b411x-rDs-k3b411x-lsDs-k3b411x-ms

Table of Contents