Honeywell Ademco VISTA-128BPT Integration Note page 6

g! C D
ONFIGURATION ETAILS
The following table provides settings used in the g! Configurator when connecting to the Ademco panel. Please refer to the Configurator Reference Guide
for more details.
"<Select>"
o
"<User Defined>", etc.
o
"<Auto Detect>", etc.
o
"<Defined in Security System>"
o
Devices
Communication Devices
Security Panels
Partions
Zones
Notes:
1. Ademco does not support Entry/Exit delay communication and Entry Sound features are not available.
2. Ademco does not support bypassable zones from external automation systems.
3. For each zone, add the partitions in which that zone is a part.
Select the appropriate item from the list (or drop-down) in the Configurator.
Type in the desired name for the item.
The system will auto detect this variable.
The security installer must provide the information to you.
Variable Name
<User Defined> (Default: Security)
Name
Type Serial Port
Communication Type Standard Connection
<User Defined> (Not Required)
Location
<Select>
Com Port
<User Defined> (Default: Ademco VISTA-128BPT,250BPT)
Name
Device Type Ademco VISTA-128BPT,250BPT
<User Defined> (Not Required)
Location
<Select> (Default: Secuirty)
Comm Device
Name Show Auto Keys
Disarm Disarm Yes
Mode 1 Stay Yes
Mode 2 Away Yes
Mode 3 Instant Yes
Mode 4 Max Yes
<User Defined>
Name
Entry Delay Features <NONE>
<User Defined>
Name
No (See Note 2)
Enable Bypass
<Select> (See Note 3)
Exists in Partition
Setting
NO 4
NO 4
NO 4
NO 4
NO 4
6 of 7
Comments
See Note 1
See Note 2
See Note 3