Appendix A - Product Conformity In Eea; General Information; Electromagnetic Compatibility, Emc - ABB ACS 300 User Manual

Appendix A - Product Conformity in EEA

General Information

Electromagnetic
Compatibility, EMC
ACS 301 Frame Size R1
ACS 311 Frame Size R0
ACS 300 User's Manual
This appendix contains information regarding conformity
with the requirements of the European Economic Area. For
additional information, refer to ABB Technical Guide No. 2,
EU Council Directives and Variable Speed Drives , and ABB
Technical Guide No. 3, EMC Compliant Installation and
Configuration for a Power Drive System .
Information given here is applicable only for the ACS 300
Frequency Converter with which this information is attached.
This information may not be applicable for other ACS 300
Frequency Converters or for ACS 300 User´s Manuals with
later revisions than Rev B.
This information is valid for the products with CE marking.
Electromagnetic Compatibility (EMC), Directive 89/336/
EEC, as Amended by 93/68/EEC
The frequency converters of series ACS 300 are in confor-
mity with the harmonised standards as specified below and
following the provisions of this Directive, provided that the
installation of the converter is done according to instructions
and requirements given in this User´s Manual:
Chapter 2 - Mechanical Installation
Chapter 3 - Power Connections
Chapter 4 - Control Connections
The converters with type codes ACS 301-1P6-3,
ACS 301-2P1-3, ACS 301-2P7-3, ACS 301-4P1-3,
ACS 301-4P9-3, ACS 301-6P6-3, ACS 301-2P1-1 (1-
phase), ACS 301-2P7-1 (1-phase), ACS 301-4P1-1 (1-
phase) as well ACS 311-1P1-1 and ACS 311-1P6-1 used in
the connection of an external RFI Filter, type DUCATI S-
83