Example
ACS 300 User's Manual
Let us suppose that you want to set Page 2 parameter
CON f1 to 15 Hz. The following example explains the proce-
dure required starting from the Page 1 parameter SPEED.
(
)
(
)
Figure 6-3 Example of Control Panel operation.
Note! To accelerate the rate of change of parameter value,
press and hold the
Chapter 6 - Control and Parameter Logic
Scroll to the top of Page 1.
To change to Page 2, press
Select the required Parameter by pressing
Change to Setting mode.
Blinking indicates that the parameter
value can now be changed.
Set the parameter value.
Save the selected value to permanent
memory.
Blinking stops, indicating that the
parameter value is stored in memory.
or
key.
43