Internal Call Ringing Mode; Extension Name - NEC SL1000 Getting Started Manual

SL1000 Getting Started Guide
11 On:0.25 / Off:0.25 / On:0.25 / Off:4.25
12 On:1.0 / Off:3.0
13 On:0.25 / Off:0.25 / On:0.25 / Off:2.25
4. Press Hold key to confirm the entry and step to the next option.
5. Press Mute key several times when you are done to return to the
Program Mode.
6. Press Speaker key to save changes and exit from the Programming
Mode.

Internal Call Ringing Mode

You may want to change this setting if:

You want to change the way internal calls to telephones are presented. Internal calls can either ring the
phone or voice announce where the caller can speak directly to the loudspeaker of the phone they are
calling.
System Operation:
The mode is set for the system by Program 20-02-12.
The default setting is Voice Announce mode.
Program20-02-12
Select the mode for Internal calls.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
2. Dial 20 02 12. Change the Internal Call Ringing Mode (0: Ring
Mode/1: Voice Announce Mode) if require.
3. Press Hold key to confirm the entry and step to the next option.
4. Press Mute key several times when you are done to return to the
Program Mode.
5. Press Speaker key to save changes and exit from the Programming
Mode.

Extension Name

You may want to change this setting if:

You want to add or edit the extensions name which is shown in the Multi-Line telephone display.
System Operation:
The mode is set for the system by Program 15-01-01
The default setting is not assigned to the Extension Name for all extensions.
Program15-01-01
Enter the Extension Name.
1. After Log-In to the Programming Mode.
If you already Log-In the programming mode, skip this operation.
Operation
Operation
35
Display shows;
Program Mode
20-02-12
ICM Call Type 1
Display shows;
Program Mode