Buffalo WLA2-G54C Quick Setup Manual page 6

AirStation Configuration
After you have configured the network adapter properties and are connected
or associated to the wireless bridge, Basic and Advanced configurations can
be made to customize internal and external connections. A convenient web
browser interface is included on the bridge to allow these modifications. Launch
a web browser window such as Internet Explorer or Netscape Navigator to
configure the AirStation. In the Address field of the web browser window,
type in http://192.168.11.100 and click "Go" or enter to access the browser
configuration interface. If you have previously modified the LAN IP address,
enter the custom IP address instead. If
the IP address has been lost / forgotten
press the red INIT button on the bottom
face of the AirStation for several seconds
until the red DIAG light illuminates. This
will restore the bridge to default factory
settings.
Note: If you cannot access the interface, verify that you have correctly
connected the AirStation's cables and followed the previous steps. Otherwise,
please contact Buffalo Technical Support through one of the options listed at the
end of this guide.
6