Buffalo WLA2-G54C Quick Setup Manual page 3

Connecting Cables to the AirStation
Carefully following the instructions for connecting cables to your AirStation is
key to a quick and simple initial setup.
Wireless Connection
DSL/Cable Modem AirStation Wireless Laptop
(Router)
Plug the provided 7 ft. Ethernet cable into the LAN port on the AirStation and
plug the other end into a hub, switch, or router on your Local Area Network .
Power on the AirStation. Wait for the green wireless and Ethernet lights to stop
flashing before trying to configure the AirStation.
Wired Connection
AirStation Connected Computer
Plug the provided 7 ft. Ethernet cable into the LAN port on the AirStation and
plug the other end into a hub, switch, or router on your Local Area Network.
Plug another Ethernet cable into the port on your computer's Network Interface
Card (NIC).
Power on the AirStation. Wait for the green wireless and Ethernet lights to stop
flashing before trying to configure the AirStation.
3