Buffalo WLA2-G54C Quick Setup Manual page 5

Decide on a Mode for Initial Connection to the AirStation
Configuring the AirStation using a Wireless connection
Please consult with your wireless client card manufacturer on the proper setup
and operation of your client card. You will need to wirelessly associate to the
WLA2-G54C by connecting to its SSID (Refer to Page 2 of this Quick Setup
Guide for more Information).
Before you attempt to connect to the AirStation's Configuration Pages, you must
first manually configure an IP address on your computer. This is done by:
Windows 98SE
- Right-click on Network Neighborhood or
My Network Places and select Properties
- Select the Configuration tab, scroll down
to TCP/IP- -> Wireless LAN Adapter
and press Properties
- Specify an IP address
- IP address = 192.168.11.2
- Subnet mask = 255.255.255.0
- Click OK to close Internet Protocol (TCP/
IP) Properties
- Close Network Connections window
Windows 2000/ME/XP
- Right-click on Wireless Network
Connection and select Properties
- Scroll down to Internet Protocol (TCP/IP)
and press Properties
- Select Use the following IP address
- IP address = 192.168.11.2
- Subnet mask = 255.255.255.0
- Click OK to close Internet Protocol (TCP/
IP) Properties
- Close Network Connections window
5