Buffer Roller Unit; Removing The Buffer Roller Unit - Canon SADDLE FINISHER K3 Service Manual

CHAPTER 3 MECHANICAL SYSTEMS

1.6 Buffer Roller Unit

1.6.1 Removing the Buffer Roller
Unit
1) Open the front cover and the upper
cover.
2) Remove the buffer roller knob and the
inside cover.
3) Disconnect the connector [1], and re-
move the two screws [2]; then, detach
the upper cover sensor base [3].
4) Free the harness [5] from the cord
clamp [4].
5) Disconnect the connector [6], and re-
move the two screws [7]; then, detach
the buffer path switching solenoid (SL1;
[8]).
3-28
COPYRIGHT© 2001 CANON INC. 2000 2000 2000 2000 CANON SADDLE FINISHER K3/K4 REV.0 MAR. 2001
[2] [1]
[3]
F03-106-01
[7]
[8] [5]
F03-106-02
[2]
[4] [6]