Q & A - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
TROUBLESHOOTING PROCEDURES
Q & A
This section contains questions and answers for using your fax machine. If you have
encountered a problem, find the question relating to your problem and take the steps
recommended to correct the problem.
Setting Up the MFC
Question
The MFC does not print.
Windows ® Setup Printing Problems
Question
I can not print from my
application software.
Sometimes I get a error
message, PRINT
OVERRUN when
printing certain
documents from
®
Windows .
16-11
Recommendation
Check the following:
• The MFC is turned on.
• The toner cartridge and drum unit are installed properly.
• The interface cable is securely connected between the MFC
and computer.
• Check to see if the LCD is showing an error message. (See
page 16-2~4.)
Recommendation
• Make sure the Windows
selected it in your application software.
• If you use the optional serial interface, make sure the serial
slide switch of the serial interface is in the correct position and
the DIP switches interface settings are correctly set up. (Only
for MFC 6550MC/7550MC)
• If you are using the supplied Windows
recovery operation on in the Setup dialog box and try again.
• Reduce the print resolution or reduce the complexity of your
document and try again.
• Expand the printer memory by installing one of the optional
memory boards.
®
printer driver is installed and you
®
driver, turn the error