Flowchart Of An Incoming Call - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
GETTING STARTED

Flowchart of an Incoming Call

1 ) FAX: ON
VOICE: ON
Fax reception is
activated by the
CNG Fax Tones
automatically .
The fax message
is received into
memory.
MEMORY
If the caller stops speaking for 5 seconds while leaving a message, the machine will
go into fax receiving mode automatically.
2 ) FAX: ON
VOICE: EXT.
(External Answering Machine is ON.)
Fax reception is
activated by the
CNG Fax Tones
automatically.
The fax message
is received into
MEMORY
memory.
N O T E: OGM = outgoing message
MESSAGE CENTER MODE SETTINGS
Incoming Call
Auto dial
MSG CTR OGM
is activated.
fax call
Voice call
The caller leaves
a voice message
in digital memory
or hangs up.
Incoming Call
Auto dial
The external TAD
OGM is activated.
fax call
Voice call
The caller leaves
a voice message
on the external
TAD.
The caller must
press your
Manual
remote code to
fax call
activate the
machine.
The fax message
MEMORY
is received into
The caller
memory.
can also
send a fax
The caller must
press your
Manual
remote code to
fax call
activate the
machine.
The fax message
is received into
EXT.
memory.
TAD
MEMORY
REMOTE
CODE
*51
(see page
6-14~17.)
MEMORY
REMOTE
CODE
*51
(see page
6-14~17.)
MEMORY
9 - 3