F) Receive Password; Turning Receive Password On Or Off - Brother MFC-4550 Operation Manual

MFC 4550/6550MC/7550MC
OP-US-5.0
RECEIVING FAXES AND OTHER CALLS
NOTE: "TX" means Transmit, "RX" means Receive.
CONTENTS OF THE LIST:
- DATE & TIME 1
- CALLER ID 2
- NAME (ONLY WHEN AVAILABLE) 3
- C O M M E N T
COMMENTS
• TX means your machine sent a fax message when it was polled or called.
• RX means your machine received a fax message (except Polling or Call
Reservation).
• TEL means you answered a telephone call at your MFC, external TAD or
external phone, or you receive an ICM in your Message Center memory (Only
for MFC 6550MC/7550MC).
• BLANK means the call was not answered or you answered on an extension
phone.
F) RECEIVE
If you set this function to on, you can prevent reception of "junk faxes" that can
interfere with your daily operations. However, then your machine will receive only
faxes from sending machine whose fax number is registered as one of your One-Touch
numbers. (Your machine compares the last four digits of the sending fax machine's
number to the fax numbers stored in your One-Touch keys.)

Turning Receive Password On or OFF

You can set receive password status to ON or OFF.
KEYS TO PRESS
1 . Press Function.
(The MFC 4550 will skip to Step 4.)
2 . Wait for two seconds.
(Only for MFC 6550MC/7550MC)
3 . Press 1.
(Only for MFC 6550MC/7550MC)
4 . Press 7.
6-31
4
WILL INCLUDE:
PASSWORD
CALLER ID
THE DISPLAY WILL SHOW:
0 9 / 1 2 / 1 9 9 6
O N L I N E
ENTER NO.
(Only for MFC
1 . F A X
6550MC/
2 . P R I N T E R
7550MC)
(Only for MFC
1 . F A X
6550MC/
7550MC)
7 . S E T U P
1 5 : 2 5
& SET
S Y S T E M